How to clean stainless steel mixing tank

Stainless steel mixing tank is a mixing equipment made of stainless steel 304 or 316L. Compared with ordinary mixing tanks, stainless steel mixing tanks can withstand higher pressures. Stainless steel mixing tanks are widely used in food, medicine, winemaking and dairy industries.

After each production, the equipment needs to be cleaned, then the editor will teach you how to clean the stainless steel mixing tank.

1. Before cleaning the mixing tank, it is necessary to confirm that there is no residual material in the tank, and then clean it.

2. Connect one end of the water pipe to the cleaning ball interface on the top of the mixing tank (generally, when the mixing tank is produced, the manufacturer will match the cleaning ball on the top of the tank), and the other end is connected to the floor drain. Open the water inlet valve first, so that the cleaning ball can enter the water into the tank while working.

3. When the water level of the mixing tank reaches the water level observation window, start the mixing and open the sewage outlet valve.

4. Wash while stirring, keep the water inlet of the water pipe consistent with the water outlet of the mixing tank, and rinse for two minutes. After rinsing with cold water for two minutes, turn on the temperature knob, set the temperature to 100°C, and rinse with hot water for three minutes after reaching the temperature. (If the material is not easy to clean, you can add an appropriate amount of baking soda as a cleaning agent)

5. If baking soda is added as a cleaning agent, the mixing tank must be rinsed with water until the water quality is neutralized with phenolphthalein reagent.

6. After cleaning the mixing tank, turn off the power, clean the surroundings, and you are done.

Post time: Mar-07-2022