page_banne
  • Introduction of the Cryogenic filter

    Introduction of the Cryogenic filter

    Cryogenic filters are used to remove unwanted particles, contaminants and microbial presence from the cryogenic liquids. Chase cryogenic filters aid in delivering sterility to liquids at required flow rates.  Materials of construction is stainless steel The heart of the filter is the element which is made of the following:   1.Recleanable, pleated microweave 316 stainless steel Available in seven filtration ratings from 5um to 200 micron absolute 2.316L sintered stainless steel Avai...
  • Stainless steel steam filter element replacement of P-GS

    Stainless steel steam filter element replacement of P-GS

      KOSUN’S filter elements are designed for filtering steam and aggressive liquids or gases. Filtered steam is required whenever steam comes in direct contact with food product or product contact surfaces. It is also necessary to protect sterile filter integrity when using steam to sterilize filter elements. Filtered steam is recommended for the protection of precision modulating system components like pressure reducing valves, and to maintain efficiency of any heat transfer equipmen...
  • Stainless Steel Sterile Air, Steam & Liquid Filter Element replacement of (P)-GSL N

    Stainless Steel Sterile Air, Steam & Liquid Filter Element replacement of (P)-GSL N

    Kosun’s filter element is made of stainless steel 316l pleated filter mesh that remove the contaminants such as particles ,rust ,dirty . It is used in higher capacity applications of lower pressure drop .   The filter element connection is available with UF connection and code7(226) Available with back flushing or ultrasonic cleaning O-Ring: EPDM; Viton Temperature Range: -68°F to 300°F Maximum Differential Pressure: 72 PSID Replacement For: P-GSL Parker Domnick Hunter, Pall, RP Adam...
  • Stainless steel powder sintered filter for steam

    Stainless steel powder sintered filter for steam

    Stainless steel powder sintered filter for steam, stainless steel sintered or titanium sintered. 0.5micron up to 100 micron
  • PP PTFE PES pleated filter cartridge

    PP PTFE PES pleated filter cartridge

    The PP PTFE PES pleated filter element is made of ultra-fine polypropylene PP PTFE PES fiber membrane and non-woven fabric or (silk mesh) inner and outer support layers folded. It is the most economic solution of cartridge filtration and most commonly used in winery and brewery.
  • stainless steel pleated filter cartridge

    stainless steel pleated filter cartridge

    Material: 304, 306, 316, 316L stainless steel wire mesh, stainless steel perforated mesh, stainless steel expanded mesh, stainless steel mat mesh and sheet metal.
  • Stainless steel backwashable mesh sintered filter

    Stainless steel backwashable mesh sintered filter

    Stainless steel mesh sintered filter, from 10inch upto 40inch, good backwashable ability good strength, hardness and good positioning of opening
  • 12inch 16inch lenticular depth stack filter

    12inch 16inch lenticular depth stack filter

    Lenticular module, depth stack filter cartridge, depth filter, stack filter, 12inch and 16inch, 15-16 cell, DOE adapter
  • PP pleated high flow filter cartridge

    PP pleated high flow filter cartridge

    PP pleated high flow filter cartridge, pall or 3M style, 6" diameter, various micron size available
  • pp melt blown filter cartridge

    pp melt blown filter cartridge

    pp melt blown filter cartridge, 5 micron, from 10inch upto 40inch, high dirt holding capacity, low pressure drop, high flow rate, good chemical resistance